filename: tfs 2457.doc version 2.3 24.04.2014 vectron international filter specification tfs 2457 1/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. measurement condition ambient temperature: 23 c input power level: 0 dbm terminating impedance: input: 50 output: 50 characteristics remark: the attenuation at the nominal frequency f n is defined as the insertion loss a e . the nominal frequency f n is fixed at 2457.6 mhz without any tolerance or limit. the values of absolute attenuation a abs and insertion loss a e are guaranteed for the whole operating temperatu re range. the frequency shift of the filter in the operating temperature range is in cluded in the production tolerance scheme. d a t a typ. value tolerance / limit insertion loss a e 4.0 db max. 5.0 db nominal frequency f n - 2457.6 mhz centre f requency f c 2429.6 mhz bandwidth bw 3 db 171.4 mhz - absolute attenuation a abs @ 1230.46 mhz 45 db min. 35 db @ 3691.40 mhz 37 db min. 33 db @ 4921.87 mhz 30 db min. 25 db @ 6152.33 mhz 25 db min. 10 db @ 7382.81 mhz 16 db - input power level - max. 10 dbm operating temperature range otr - -40 c ... +90 c storage t emperature r ange - -45 c ... +95 c temperature c oefficient of f requency tc f * -72 ppm/k *) ? f(hz) = tc f (ppm/k) x (t-t 0 ) x f to (mhz). no relevant temperature-induced charge gener ation. generated: checked / approved:
filename: tfs 2457.doc version 2.3 24.04.2014 vectron international filter specification tfs 2457 2/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. filter characteristic construction and pin connection (all dimensions in mm) 1 2 3 5 6 7 4 8 1 ,0 +/-0,15 3 ,0 +/-0,15 0,6 +/-0,15 0,6 +/-0,15 0,6 +/-0,15 3 ,0 +/-0,15 6 0 1 3 7 5 date code 50 test circuit l1 saw l2 1, 3, 4, 5, 7, 8 2 6 w57 e17 1 ground 2 input 3 ground 4 ground 5 ground 6 output 7 ground 8 ground date code: year + week e 2014 f 2015 g 2016 ... 2000 3000 4000 5000 6000 7000 -60 -50 -40 -30 -20 -10 0 frequency in mhz m ag nitud e in db 2330 2350 2370 2390 2410 2430 2450 2470 2490 2510 2530 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 frequency in mhz m ag nitud e in db
filename: tfs 2457.doc version 2.3 24.04.2014 vectron international filter specification tfs 2457 3/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. stability characteristics, reliability after the following tests the filter shall meet the whole specification: 1. shock: 500g, 1 ms, half sine wave, 3 shocks each plane; din iec 68 t2 - 27 2. vibration: 10 hz to 500 hz, 0.35 mm or 5 g respe ctively, 1 octave per min, 10 cycles per plane, 3 planes; din iec 68 t2 - 6 3. change of temperature: -55 c to 125c / 15 min. each / 1 00 cycles din iec 68 part 2 ? 14 test n 4. resistance to solder heat (reflow): reflow possible: three ti mes max.; for temperature conditions refer to the attached " air reflow temperature conditions" on page 4; this filter is rohs compliant (2011/65/eu) packing tape & reel: iec 286 ? 3, with exception of value f or n and minimum bending radius; tape type ii, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: 3000 reel of empty components at start: min. 300 mm reel of empty components at start including leader : min. 500 mm trailer: min. 300 mm g do w ct f e g d1 p2 p1 po bo ao pull off direction pin marker typ date code ko t a c n w 1 w 2 the minimum bending radius is 45 mm. tape (all dimensions in mm) w : 8,00 0,3 po : 4,00 0,1 do : 1,50 +0,1/-0 e : 1,75 0,1 f : 3,50 0,05 g(min) : 0,75 p2 : 2,00 0,05 p1 : 4,00 0,1 d1(min) : 1,50 ao : 3,25 0,1 bo : 3,25 0,1 ct : 5,3 0,1 reel (all dimensions in mm) a : 180 w1 : 8,4 +1,5/-0 w2(max) : 14,4 n(min) : 60 c : 13,0 0,2
filename: tfs 2457.doc version 2.3 24.04.2014 vectron international filter specification tfs 2457 4/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. air reflow temperature conditions conditions exposure average ramp-up rate (30c to 217c) less than 3c/ second > 100c between 300 and 600 seconds > 150c between 240 and 500 seconds > 217c between 30 and 150 seconds peak temperature max. 260c time within 5c of actual peak temperature between 10 and 30 seconds cool-down rate (peak to 50c) less than 6c/second time from 30c to peak temperature no greater than 300 seconds temperature / c time / s max. 260c 217c 10 ... 30 s 30 ... 150 s max. 300 s chip-mount air reflow profile
filename: tfs 2457.doc version 2.3 24.04.2014 vectron international filter specification tfs 2457 5/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. history version reason of changes name date 1.0 generation of development specification. channaa 07.03.2011 2.0 typo in 3691,4mhz corrected, add typical value s. add filter characteristic, generation of filter sp ecification. channaa 30.06.2011 2.1 change remark. channaa 23.12.2011 2.2 remark corrected. molke 14.12.2012 2.3 remark changed. filter characteristic updated. sch?nbein 24.04.2014
|
